Coloram 2 power supply manual

Forerunner Power Supply for 16 units WYBRON COLORAM II The Coloram II offers the possibility of up to 32 frames of color and auto-senses the length of your string for cueing. Units are individually DMX addressable and daisy chainable to the separate power supply using 4 pin XLR. An extra DMX channel allows you to control fan. CXI IT User Manual Revised March, Page 6 Quick Start 1. Connect the equipment A. Attach the CXI IT color changer to a powered light fixture. B. Connect the CXI IT color changer to the PS Power Supply using the 4-pin power/data cable. 2. Set up the CXI IT Color Changer A. Set the CXI IT color changer to the MIX mode (to have independent. The power supplies receive and retransmit gel string position data for blocks of channels as follows: Model - Coloram II Way Power Supply ( watt) - a block of 48 channels. The CXI cable uses 4-pin XLR connectors. Note: Professionally maintained and teched prior to shipment.

This applies to Coloram II. Installing / Connecting the Coloram II Power Supply To get your Coloram II Power Supply up and running, follow these hookup and checkout procedures. Mount the power supply The Coloram II Power Supply is designed to be free standing, truss mounted, or rack mounted. Page 16 - VAC (50/60 Hz) or - VAC (50/60 Hz). Power at the Coloram II Power Supply is indicated by the red display which can be viewed from the stage. Set the power supply starting DMX channel by using the SETUP menu. If talkback is enabled on the power supply, the starting power supply channel is limited to 1, 4, 7, 10, 13, etc. As with Coloram II, the Goboram II channel setting formula is: DMX channel = Goboram II starting channel + power supply starting channel - 1. Coloram-IT User Manual Models or or $ Quick View. Compare. check-mark. The Coloram II Power Supply is to be used in an indoor environment only and is not intended for residential use. The Coloram II color changers are not intended for residential use.

two handles, located on the sides of the power supply. a Wybron CXI or a Wybron Coloram II are referred to in this manual as direct DMX scrollers. WYBRON COLORAM POWER SUPPLY! Because of reversed power pin designation; using the Wybron Coloram. PSU will cause serious damage to the Smart Color. Be sure to read and understand all instructions in this manual. • The MXR 2 is Wybron Coloram II or Wybron IT power supplies are not compatible and.